HOT GALVANIZED METAL POST FOR VINEYARDS
HOT GALVANIZED METAL POST WITH EXTERNAL AND INTERNAL BUTTONHOLES
The metal post is considered as the new support in the modern winegrowing. They are replacing the most common wooden and concrete poles.
Thanks to its easy handling which allows to be set up everywhere, the Metal Post gives to the Vineyard Layout a sturdy and efficient structure.
Furthermore, the metal posts allow to increase the mechanical processes on the field. Thanks to their flexibility the passage of the machineries is easier also in small vineyard with short width.
Beyond, a lot of the best accessories for vineyards such as Wire Spreader, Wire Brackets, Wire tensioner collars fit perfectly to the post shape without huge production costs.
The most part of Metal Post are produced with external buttonholes but are present on the market also excellent Metal Posts with internal buttonholes, Due to the fact the Mechanical Harvesting is keep using in the new vineyards, the first ones are considered more comfortable when this Machinery is used to pick up the grape.
The metal posts are produced with sturdy Steel, created to support all the stress from the mechanical passages.
PAINTED HDG METAL POST! THE SAME EFFECT OF THE WOODEN ONES BUT WITH THE STEEL WARRANTY!
In the last years, a lot of producers are increasing the durability of the Hot Galvanized Metal Post painting the part inside the ground. This process helps the structure of the post to have more durability over the years.
At the same time, in order to not have an ugly aesthetic impact on the hills, the whole Metal Post can be painted with brown paint. This is a fundamental thing for those landscapes (for example Langhe – Unesco) where this aspect is considered crucial for the new vineyards planting.
What type of Zinc-Coated is the most suitable over the years?
Standard: Higly qualitative hot-dip galvanization.
Our profile distinguish themselves for the highly qualitative hot-dip galvanitation (single-piece) with addition of alluminium. The result of our hot-dip galvanization is a reasonable outer zinc layer with a typical thickness of 60 to 70 µm (approx. 850 g/m²) which extends the life of the posts to over 30 years. Single-piece hot-dip galvanitation is the process of subjecting the steel materila to a protective molten zinc at 450° C. Other type of Finishing and qualities on demand.
Expecting zinc life coating. How many years can a Hot Deep Galvanized Post goes on over the years?
If the post has been set correctly, a consumption of the of approximately 1 to 1.5 micron can be expected in the soil area of the posts by all type of galvanitation. For an hot-dip galvanized post, this means a lige span of over 45 years.
A rusting post still has a life of approximately 1 to 5 years, depending of the aggressiveness of the soil.
Zinc coating protects from rust
has proved an excellent material for vineyard posts. It is economical, particularly stable and easy to work. Anyway, if bare steel is exposed to air humidity, it rusts within a short time loosing
all its good material characteristics. This is the reason why a number of methods have been developed over the years to protect the surface of steel from corrosion.
Zinc coating has proved particularly suitable for the following reasons:
During the single-piece hot-dip galvanization, steel posts - after being manufactured - are completely coated with a zinc layer in a bath of molten zinc. The zinc coating formed during this process has a thickness of 60 µm to 70 µm.
GALFAN® strip galvanized posts are manufactured from steel strips that have been previously galvanized. After profiling, the posts are immediately ready for use (lower production costs). Though, during the manufacturing process, the zinc layer is partly scraped off, pressed and streched. For this reason, it would be reasonable to coat the steel strips with so much zinc as possible but the thicker the zinc layer is, the easier the zinc coating cracks during profile shaping. Therefore, only thin zinc layers with a thickness up to approx. 25 µm can be reliably processed. In contrast to the single-piece hot-dip galvanization where the “natural” layer thickness of 60 µm to 70 µm cannot be modified, GALFAN® steel strips have a zinc layer thickness freely varying between 5 µm und 30 µm. In this case, it is worthwhile comparing among the various suppliers.
If the particular characteristics of a zinc coating are taken into account, the single-piece hot-dip galvanized posts reach a lifetime of more than 30 years. This information helps you with the right handling.
DO NOT HESITATE TO CONTACT US FOR ANY YOUR NEED.
JUST ASK FOR A FREE ESTIMATES!